-40%

50Pcs Heat Shrink Sleeving Tube Kit

 120.00

Heat Shrink Tube & Sleeve is used in electrical, electronic projects to cover the joints of wire safely. Heat Shrink Tubing & Sleeve is made from flexible polythene with an internal layer of special thermoplastic adhesive. This is a pack of 50pcs of heat shrink tubes of size from 1-10 diameter.

Description

Heat Shrink tube is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Heat Shrink Tubing & Sleeve is made from flexible polythene with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively cross-linked while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121 deg C (250 deg F), the heat shrink tube rapidly shrinks to a skin tight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics, and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water-resistant barrier. Adhesive re flow will occur at temperatures above 80 deg C.

Features of Heat Shrink Tube Kit

  • Shrinkage Ratio: 2:1(will maximum shrink to 1/2 its supplied diameter)
  • Minimum Shrinkage Temp: +70°C
  • Full Shrinkage Temp: +110°C maximum
  • Operating Temperature: -55°C to +125°C
  • Tensile strength: 10.4Mpa
  • Dielectric strength: 15 kV/mm
  • Manufacture specification: ISO9001
  • Flammability: Flame Retardant
  • Approvals: UL Approved
  • Supplied format (round or flat): Product is supplied flat
  • Cutting method: Scissors or knife
  • Material: Polyolefin
  • Package Includes: 50Pcs

Reviews

There are no reviews yet.

Be the first to review “50Pcs Heat Shrink Sleeving Tube Kit”

Your email address will not be published. Required fields are marked *