-9%

CH341A Programmer BIOS Read/Writer

 680.00

CH341A USB Programmer Series 24 EEPROM Writer 25 SPI Flash BIOS Board Module USB to TTL 5V-3.3V Software Driver Download

Category:

Description

CH341a programmer 24 and 25 series of FLASH has been very popular at present. Burn for these chips, currently only professional programmer can support, but the price of a professional programmer is very expensive, not general maintenance users can have; So we can create a support block 24 series of EEPROM and ST, WINBOND, AMIC, MXIC, SST, SPANSION, EON, PMC and other manufacturers of 8 feet 25 series chip programmer.

To all sorts of color TV set memory (24 series IC), LCD (24.25 series IC)  desktop motherboard (25 series IC) notebook (25 series IC) router (25 series IC) card (25 series IC) DVD (25 series IC), set-top boxes (25 series IC) software to unlock, backup, erasing, burning, check.

  • By special USB chip CH341A production. USB1.1 communication. Burning speed than ordinary ATMEGA8 25
    Series of programming 2-3 times faster.
  • Erase the Burning Check Speed about 2-3 mbit per minute.
  • Very suitable for amateur burning
  • 24 and 25 series of FLASH.
  • Support All versions of Microsoft Windows 7, 8, 10 etc & Linux & Mac OS
  • Uses the USB port power supply

 

For SPI & IIC Chip Programming (24 & 25 Series)

  • Put the Programmer in Computer USB port
  • Open the “CH341A programmer software” the burning software.
  • Choose Chip Capacity if using 24 Series, Click Detect for auto Detection of Chip of 25 Series
  • Can Burn Write, Erase & Backup Chips

 

For Serial TTL Programming

  • Set the Jumper
  • Put the Programmer computer USB port,
  • Programmer has Serial Pinouts of  RX, TX & GND
  • Connect RX Pin to TX Pin & TX pin to RX Pin & GND to GND
  • Choose corresponding COM port,
  • Open the Corresponding Download Software Platform for example (PUTTY for Serial Terminal Emulator)

 

Reviews

There are no reviews yet.

Be the first to review “CH341A Programmer BIOS Read/Writer”

Your email address will not be published. Required fields are marked *